Using WhiteNoise with Django


To use WhiteNoise with a non-Django application see the generic WSGI documentation.

This guide walks you through setting up a Django project with WhiteNoise. In most cases it shouldn’t take more than a couple of lines of configuration.

I mention Heroku in a few place as that was the initial use case which prompted me to create WhiteNoise, but there’s nothing Heroku-specific about WhiteNoise and the instructions below should apply whatever your hosting platform.

1. Make sure staticfiles is configured correctly

If you’re familiar with Django you’ll know what to do. If you’re just getting started with a new Django project then you’ll need add the following to the bottom of your file:

STATIC_ROOT = os.path.join(BASE_DIR, 'staticfiles')

As part of deploying your application you’ll need to run ./ collectstatic to put all your static files into STATIC_ROOT. (If you’re running on Heroku then this is done automatically for you.)

In Django 1.9 and older, make sure you’re using the static template tag to refer to your static files. For example:

{% load static from staticfiles %}
<img src="{% static "images/hi.jpg" %}" alt="Hi!" />

In Django 1.10 and later, you can use {% load static %} instead.

2. Enable WhiteNoise

Edit your file and add WhiteNoise to the MIDDLEWARE_CLASSES list, above all other middleware apart from Django’s SecurityMiddleware:

  # '',
  # ...

That’s it – WhiteNoise will now serve your static files. However, to get the best performance you should proceed to step 3 below and enable compression and caching.

3. Add compression and caching support

WhiteNoise comes with a storage backend which automatically takes care of compressing your files and creating unique names for each version so they can safely be cached forever. To use it, just add this to your


If you need to compress files outside of the static files storage system you can use the supplied command line utility


If you are having problems after switching to the WhiteNoise storage backend please see the troubleshooting guide.

Brotli compression

As well as the common gzip compression format, WhiteNoise supports the newer, more efficient brotli format. This helps reduce bandwidth and increase loading speed. To enable brotli compression you will need the brotlipy Python package installed, usually by running pip install brotlipy and updating your requirements.txt file.

Brotli is supported by Firefox and will shortly be available in Chrome, and no doubt other browsers too. WhiteNoise will only serve brotli data to browsers which request it so there are no compatibility issues with enabling brotli support.

Also note that browsers will only request brotli data over an HTTPS connection.

4. Use a Content-Delivery Network

The above steps will get you decent performance on moderate traffic sites, however for higher traffic sites, or sites where performance is a concern you should look at using a CDN.

Because WhiteNoise sends appropriate cache headers with your static content, the CDN will be able to cache your files and serve them without needing to contact your application again.

Below are instruction for setting up WhiteNoise with Amazon CloudFront, a popular choice of CDN. The process for other CDNs should look very similar though.

Instructions for Amazon CloudFront

Go to CloudFront section of the AWS Web Console, and click “Create Distribution”. Put your application’s domain (without the http prefix) in the “Origin Domain Name” field and leave the rest of the settings as they are.

It might take a few minutes for your distribution to become active. Once it’s ready, copy the distribution domain name into your file so it looks something like this:

STATIC_HOST = '' if not DEBUG else ''

Or, even better, you can avoid hardcoding your CDN into your settings by doing something like this:

STATIC_HOST = os.environ.get('DJANGO_STATIC_HOST', '')

This way you can configure your CDN just by setting an environment variable. For apps on Heroku, you’d run this command

heroku config:set DJANGO_STATIC_HOST=


By default your entire site will be accessible via the CloudFront URL. It’s possible that this can cause SEO problems if these URLs start showing up in search results. You can restrict CloudFront to only proxy your static files by following these directions.

5. Using WhiteNoise in development

In development Django’s runserver automatically takes over static file handling. In most cases this is fine, however this means that some of the improvements that WhiteNoise makes to static file handling won’t be available in development and it opens up the possibility for differences in behaviour between development and production environments. For this reason it’s a good idea to use WhiteNoise in development as well.

You can disable Django’s static file handling and allow WhiteNoise to take over simply by passing the --nostatic option to the runserver command, but you need to remember to add this option every time you call runserver. An easier way is to edit your file and add whitenoise.runserver_nostatic immediately above django.contrib.staticfiles like so:

    # ...
    # ...

Available Settings

The DjangoWhiteNoise class takes all the same configuration options as the WhiteNoise base class, but rather than accepting keyword arguments to its constructor it uses Django settings. The setting names are just the keyword arguments uppercased with a ‘WHITENOISE_’ prefix.


Absolute path to a directory of files which will be served at the root of your application (ignored if not set).

Don’t use this for the bulk of your static files because you won’t benefit from cache versioning, but it can be convenient for files like robots.txt or favicon.ico which you want to serve at a specific URL.


Recheck the filesystem to see if any files have changed before responding. This is designed to be used in development where it can be convenient to pick up changes to static files without restarting the server. For both performance and security reasons, this setting should not be used in production.


Instead of only picking up files collected into STATIC_ROOT, find and serve files in their original directories using Django’s “finders” API. This is the same behaviour as runserver provides by default, and is only useful if you don’t want to use the default runserver configuration in development.

Default:60 if not settings.DEBUG else 0

Time (in seconds) for which browsers and proxies should cache non-versioned files.

Versioned files (i.e. files which have been given a unique name like base.a4ef2389.css by including a hash of their contents in the name) are detected automatically and set to be cached forever.

The default is chosen to be short enough not to cause problems with stale versions but long enough that, if you’re running WhiteNoise behind a CDN, the CDN will still take the majority of the strain during times of heavy load.


A dictionary mapping file extensions (lowercase) to the mimetype for that extension. For example:

{'.foo': 'application/x-foo'}

Note that WhiteNoise ships with its own default set of mimetypes and does not use the system-supplied ones (e.g. /etc/mime.types). This ensures that it behaves consistently regardless of the environment in which it’s run. View the defaults in the file.

In addition to file extensions, mimetypes can be specified by supplying the entire filename, for example:

{'some-special-file': 'application/x-custom-type'}
Default:settings.FILE_CHARSET (utf-8)

Charset to add as part of the Content-Type header for all files whose mimetype allows a charset.


Toggles whether to send an Access-Control-Allow-Origin: * header for all static files.

This allows cross-origin requests for static files which means your static files will continue to work as expected even if they are served via a CDN and therefore on a different domain. Without this your static files will mostly work, but you may have problems with fonts loading in Firefox, or accessing images in canvas elements, or other mysterious things.

The W3C explicitly state that this behaviour is safe for publicly accessible files.

Default:('jpg', 'jpeg', 'png', 'gif', 'webp','zip', 'gz', 'tgz', 'bz2', 'tbz', 'swf', 'flv', 'woff')

File extensions to skip when compressing.

Because the compression process will only create compressed files where this results in an actual size saving, it would be safe to leave this list empty and attempt to compress all files. However, for files which we’re confident won’t benefit from compression, it speeds up the process if we just skip over them.


Reference to a function which is passed the headers object for each static file, allowing it to modify them.

For example:

def force_download_pdfs(headers, path, url):
    if path.endswith('.pdf'):
        headers['Content-Disposition'] = 'attachment'


The function is passed:

A wsgiref.headers instance (which you can treat just as a dict) containing the headers for the current file
The absolute path to the local file
The host-relative URL of the file e.g. /static/styles/app.css

The function should not return anything; changes should be made by modifying the headers dictionary directly.

Default:Path component of settings.STATIC_URL

The URL prefix under which static files will be served.

Usually this can be determined automatically by using the path component of STATIC_URL. So if STATIC_URL is then WHITENOISE_STATIC_PREFIX will be /static/. However there are cases where it’s useful to set these independently, for instance if the application is not running at the root of the domain or if your CDN is doing path rewriting.

Additional Notes

Django Compressor

For performance and security reasons WhiteNoise does not check for new files after startup (unless using Django DEBUG mode). As such, all static files must be generated in advance. If you’re using Django Compressor, this can be performed using its offline compression feature.

Serving Media Files

WhiteNoise is not suitable for serving user-uploaded “media” files. For one thing, as described above, it only checks for static files at startup and so files added after the app starts won’t be seen. More importantly though, serving user-uploaded files from the same domain as your main application is a security risk (this blog post from Google security describes the problem well). And in addition to that, using local disk to store and serve your user media makes it harder to scale your application across multiple machines.

For all these reasons, it’s much better to store files on a separate dedicated storage service and serve them to users from there. The django-storages library provides many options e.g. Amazon S3, Azure Storage, and Rackspace CloudFiles.

Troubleshooting the WhiteNoise Storage backend

If you’re having problems with the WhiteNoise storage backend, the chances are they’re due to the underlying Django storage engine. This is because WhiteNoise only adds a thin wrapper around Django’s storage to add compression support, and because the compression code is very simple it generally doesn’t cause problems.

The most common issue is that there are CSS files which reference other files (usually images or fonts) which don’t exist at that specified path. When Django attempts to rewrite these references it looks for the corresponding file and throws an error if it can’t find it.

To test whether the problems are due to WhiteNoise or not, try swapping the WhiteNoise storage backend for the Django one:


If the problems persist then your issue is with Django itself (try the docs or the mailing list). If the problem only occurs with WhiteNoise then raise a ticket on the issue tracker.

Restricting CloudFront to static files

The instructions for setting up CloudFront given above will result in the entire site being accessible via the CloudFront URL. It’s possible that this can cause SEO problems if these URLs start showing up in search results. You can restrict CloudFront to only proxy your static files by following these directions:

  1. Go to your newly created distribution and click “Distribution Settings”, then the “Behaviors” tab, then “Create Behavior”. Put static/* into the path pattern and click “Create” to save.
  2. Now select the Default (*) behaviour and click “Edit”. Set “Restrict Viewer Access” to “Yes” and then click “Yes, Edit” to save.
  3. Check that the static/* pattern is first on the list, and the default one is second. This will ensure that requests for static files are passed through but all others are blocked.

Using other storage backends

WhiteNoise will only work with storage backends that stores their files on the local filesystem in STATIC_ROOT. It will not work with backends that store files remotely, for instance on Amazon S3.